User`s guide

Using the AXIS 7100 AXIS 7100 User’s Guide
26
Adding a new e-mail address to the list using a keyboard
Follow the instructions below to add temporary e-mail addresses to the
address list:
1. If the keyboard is not already connected, make sure that the power supply to
the AXIS 7100 is disconnected and connect the keyboard to the keyboard con-
nector located on the rear panel. Reconnect the power supply.
2. Press the Insert key on your keyboard. The following prompt will appear on the
message display:
3. Type the new e-mail address you want to add, and press Enter.
Note:
Adding a new e-mail address to the list from a web browser
Follow the instructions below to add temporary e-mail addresses to the
address list:
1. Start the web browser.
2. Enter the name or IP address of your AXIS 7100 in the location/address field.
This brings you to the AXIS 7100 Home Page.
Example:
3. Click Destinations. The table lists the available destinations.
4. Click New Destination and specify the settings for the new destination.
5. Click OK to save the destination temporarily.
Note:
Only the five most-recently added temporary destinations will appear in the destination list.
Contact your Network Administrator if you want to add a destination permanently.
http://172.16.253.80
Only the five most-recently added temporary destinations will appear in the destination list.
Contact your Administrator if you want to add a destination permanently.