User`s guide

Configuring the AXIS 7100 AXIS 7100 User’s Guide

Configuring the AXIS 7100

This section is targeted specifically to users responsible for the administration

of the AXIS 7100. The Administrator has high-level privileges that are denied

to the ordinary user.

The following settings must be specified by the administrator before the AXIS

7100 can be used for electronically distributing documents over your network:

• Network settings: define the parameters for TCP/IP, SMTP, printing

protocols, etc.

• Destinations: specify e-mail addresses, file servers and the RightFax server

destination.

Notes:

• If you have an active DHCP or BOOTP server on your network, most network settings will be set

automatically. However, it is strongly recommended that you verify the settings from the web

browser interface.

• When installing the AXIS 7100 for the first time, it is recommended that the Administrator

retains default system settings, profiles and paper sizes. The settings can be optionally custom-

ized at a later date once you are familiar with the operation and functionality of this product.

• Refer to the AXIS 7100 User’s Manual for information on the settings for profiles and paper

sizes.

• It is possible to enable user authentication to restrict use of the AXIS 7100 to validated users

only. For more information, please refer to the AXIS 7100 User’s Manual at the Axis web site

http://www.axis.com or on the AXIS Product CD.