User`s guide

AXIS 7100 User’s Guide Basic Installation

9. To change the value, repeat steps 4 - 6 above.

10. Press Menu to display the subnet mask setting:

11. Press Select to edit the subnet mask:

12.To change the value, repeat steps 4 - 6 above.

13.Press Menu to display the node address. This address is not editable. The

node address should equal the AXIS 7100 serial number found on the underside

label of the unit.

14.Press Menu once more to display the final instructions

15.Press Select to exit when you are finished. The AXIS 7100 will complete the

startup sequence.

16.Write the name or IP address of the AXIS 7100 on the supplied instructions label

and attach it to the top cover.

The unit is ready for use when the Status indicator stops flashing and remains

lit.

Note:

If you make a mistake when editing the parameters, press the Cancel button to cancel the

operation.