Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Defining the Job
P/N 97100-9002-000-14 Ver 06/05
3.4-1
3.4 Defining the Job
Defining the job means defining specific recipe as active so that this recipe
is assigned when the Workpiece is loaded.
To Assign a Recipe From the Auto menu:
1Select Define Job to display the following:
2 The name of the currently assigned recipe is displayed in the field in
the upper left corner. The adjacent field displays a description of the
Recipe, if one has been defined.
3 Select a Recipe from the tree displayed in the Recipe area. (To view
the properties of a particular Recipe in the Programming Workspace,
click Quick View, then click Cancel to return to the Define Job
screen.)
4 In the Job dialog box, click Apply to assign the Recipe without closing
the dialog, or OK to assign the Recipe and close the dialog box.
Figure 3-4: Job Dialog Box
Note: Check Dicer to assign the recipe to the Workpiece currently mounted on
the cutting chuck. There is no need to unload the Workpiece and load it again.
Check Default Recipe to define the chosen recipe as the active recipe. The
system will remember this setting at the next power up.