Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Graphical User Interface
P/N 97100-9002-000-14 Ver 06/05
2.2-33
2.2.10.4.2 Calibration Workbook
The Calibration Workbook enables the User to calibrate specific elements
in the System.
The following elements of the System can be calibrated:
• Pixel Size
• Illumination
• Axes (Error Mapping)
• Sensors (see below)
Selecting the High Magnifying Camera for the Vision Head (Microscope) in
the Calibration tree on the left of the workbook displays calibration
parameters on the right of the workbook. The User can perform pixel size
and illumination calibration by clicking the Calibrate buttons on the top
right of the workbook.
Parameters can be modified by double-clicking in the Value field and
entering a value.
Figure 2-9: Calibration Workbook
Caution: Changing the calibration values can affect the performance of the
Model 7100.