Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Graphical User Interface
P/N 97100-9002-000-14 Ver 06/05
2.2-31
There are three workbooks, as follows:
• Setup & Diagnostics workbook, see section 2.2.10.4.1.
• Calibration workbook, see section 2.2.10.4.2.
The User can open workbooks by selecting them from the Select
Workbook drop-down list or using the Explorer-style tree on the left of the
Workbook Workspace.
2.2.10.4.1 Setup & Diagnostics Workbook
By default, the Setup & Diagnostics workbook is displayed after clicking
the Workbook Workspace button in the main window toolbar, as follows:
The Setup & Diagnostics Workbook enables the User to perform setup and
diagnostics procedures on all System components and sub-components.
Selecting a station, or one of its elements, in the Setup & Diagnostics tree
on the left of the workbook displays its setup parameters on the upper right
of the workbook. The lower pane changes according to the selected axis.
For example, Figure 2-6 displays the setup parameters for the X Axis in
the upper right pane of the workbook, as well as diagnostic functions
relating to the X
Axis in the lower right pane. Setup parameters are
modified by double-clicking in the Value field and entering a value or by
selecting a value from a drop-down list.
Figure 2-6: Setup & Diagnostics Workbook