Installation guide

Graphical User Interface
Advanced Dicing Technologies Ltd.
2.2-24
After configuring the Zoom option, magnification can be set in the Video
Workspace by using the following controls (see
Figure 2-26):
• Manually adjusting the Magnification/Zoom ComboBox control to x1,
x2 or x4
• Clicking the +/- button in the video screen of the Video Workspace GUI
To Enable Digital Magnification:
1 Open the main workspace Configuration screen.
2 In the value column, next to the parameter Zoom, select: Yes.
The camera type automatically changes to Scorpion.
3 Click Save (see Figure 3).
To Use Digital Magnification:
In the Video Workspace, magnification can be set according to the
following:
• Manually entering a Magnification value between X0.5 and X2.0.
Figure 2-26: Zoom Controls
Note: During the Teach Align Mode Pre-Condition state, the user must choose
the Magnification size. It is also possible to teach Magnification for each model
individually.
Figure 3: Enabling Digital Magnification
Note: The magnification increment unit is X0.1.