Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Graphical User Interface
P/N 97100-9002-000-14 Ver 06/05
2.2-23
2.2.10.2.3 Zoom Controls
Digital Magnification enables using digital zoom to improve system
performance regarding alignment and accuracy. The Video Workspace
contains the tools for setting magnification levels used to display, align and
cut objects, according to specific needs. The feature supports a continuous
digital magnification range between X0.5 and X2.0.
The user can set magnifications for a variety of applications, including:
• Inspection
• Y-Offset
• Teaching models
• Alignment Procedure
• Teaching Kerf Checking
To Enable the Zoom Option:
1 Open the main workspace Configuration screen by selecting
Configuration from the User menu.
2 In the value column, next to the parameter Zoom, select: Yes.
The camera type automatically changes to Teli (see Figure 2-25).
3 Click Save.
Note: The Zoom option is available only on machines that support a “Teli”
camera type.
Note: This option is available only on machines supporting Scorpion cameras.
Figure 2-25: Zoom Option Configured