Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Graphical User Interface
P/N 97100-9002-000-14 Ver 06/05
2.2-17
2.2.10.1.2 Side View Area
The Side View area depicts the Dicer from the side, showing the Dicer and
Workpiece (if present).
When Process Height is performed, the Blade is shown being lowered to the
surface of the Cutting Chuck before returning to its previous position.
When dicing is performed, the Blade is shown moving across the surface of
the Workpiece, one cut index at a time, in the Y direction
.
The buttons at the top of the Side View area enable the Side View area to
be manipulated as follows:
Gradually zooms in on the Side View area.
Gradually zooms out of the Side View area.
Displays the Side View area in full.
1 Theta Table
2 Cutting Chuck
Figure 2-20: Side View Area
1 Spindle
2 Blade
3 Workpiece
Figure 2-21: Dicing from the Side View
1
2
1
3
2