Installation guide

Recipe Parameters
Dress Block Parameters
Advanced Dicing Technologies Ltd.
A-32
Dress Block Parameters
Table A-14 lists the parameters in the Dress Block category. Dress Block
parameters define the Dress Block settings for the Model 7100 applications
Dressing
Dressing End
Speed
The speed of the X-Axis (mm/sec) at the end of the
Dressing process.
Possible Values:
min = 1, max = 200, Default = 30
Dressing Dressing Index
The distance along the Y-Axis between adjacent cuts
in a Dressing Workpiece.
Possible Values:
min =.05, max = 100, Default = 2
Dressing
Dressing Start
Speed
The speed of the X-Axis (mm/sec) at the beginning of
the Dressing process.
Possible Values:
min = 1, max = 200, Default = 30
Table A-13: Dressing Parameters
Category Parameter Description
Table A-14: Dress Block Parameters
Category Parameter Description
Dress Block Activate
Defines if the Dress Block is activated.
Options: Yes (Default), No
Dress Block
Animation Chop
Length
Defines the animation lines displayed after every
chop.
Options: 1- 30 mm. Default = 2
Dress Block Chop X-Index
Defines the X-Index at which the saw jumps between
the chops within the X-Axis.
Options: 0.1 - 30 mm. Default = 5
Dress Block Chop Z-Start
Defines the Z-Axis position above the Dressing Block,
at which the Chopping Velocity is applied.
Options: 0.1 - 5 mm. Default = 0.3
Dress Block Chopping Velocity
Z-Axis velocity at the last stage of chopping.
Options: 0.001 - 5 mm/sec. Default = 0.2
Dress Block
Dress/Chop Cut
Depth
Cut depth to which the blade enters the Dressing
Block.
Options: 0.1 - 5 mm. Default = 1