Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Diagnostisc Parameters
P/N 97100-9002-000-14 Ver 06/05
A-31
Diagnostisc Parameters
Table A-13 lists the parameters in the Dressing category. Dressing
parameters define how the Blade is dressed.
Dressing Parameters
Table A-13 lists the parameters in the Dressing category. Dressing
parameters define how the Blade is dressed.
Table A-12: Dressing Parameters
Category Parameter Description
Diagnostics >
Chuck
Chuck height side
Possible Values:
Left, Right (default)
Diagnostics
Chuck to non
chuck tolerance
Possible Values:
min = 0, max = -, Default = 10
Diagnostics
Chuck to non
chuck Init
Tolerance
Possible Values:
min = 0, max = -, Default = 30
Diagnostics
Number of delta
measurement
Possible Values:
min = 1, max = 10, Default = 1
Table A-13: Dressing Parameters
Category Parameter Description
Dressing Dress Length
The total length of the cut to be performed.
Blade Dressing can include multiple Cut Lengths. For
every Cut Length defined, the User must define a Cut
Depth (or Depth), Begin Speed and End Speed.
Possible Values:
min = 0, max = 200000, Default = 5000
Dressing
Dressing Cut
Depth
The distance along the Z-Axis between the top of the
dressing Workpiece (or Dressing Block) and the
cutting edge of the Blade in its cutting position.
Possible Values:
min = 0, max = 18, Default = 0
Dressing Dressing Depth
The distance along the Z-Axis between Chuck Level
and the cutting edge of the Blade in its cutting
position.
Possible Values:
min =.015, max = 30, Default =.05