Installation guide

Recipe Parameters
Cut Parameters
Advanced Dicing Technologies Ltd.
A-26
Cut Entry Overcut
The distance for which the entry speed is maintained
to ensure the Blade enters the Workpiece at the
specified speed.
Possible Values (µ/sec):
min = 0, max = 30, Default = 0
Cut Exit Overcut
The distance the exit speed is maintained to ensure
the Blade actually exits the Workpiece at the specified
speed.
Possible Values (µ/sec):
min = 0, max = 30, Default = 0
Cut From Index
The number of the Index in the Cut Map at which to
start cutting.
Possible Values:
min = 1, max = 999, Default = 1
Cut Index
The distance along the Y-Axis between adjacent cuts
in a Workpiece. Multiple Indices of various lengths
can de defined for a Workpiece. The first Index is the
Main Index and subsequent Indices are subindices.
Each Index can have a different Cut Depth and
Speed.
Possible Values:
min =-300, max = 300, Default =.1
Cut Optimized Order
The cutting sequence. If set to "Yes" the cutting starts
from the last alignment angle.
Possible Values:
No: Align Angle 0, align Angle 90, cut Angle 0, cut
Angle 90
Yes: Align Angle 0, align Angle 90, cut Angle 90, cut
Angle 0
Cut Overcut
The distance for which the entry and exit speed is
maintained to ensure the Blade enters and exits the
Workpiece at the specified speed.
Possible Values:
min = 0, max = 100, Default = 0
Table A-9: Cut Parameters
Category Parameter Description