Installation guide

The Model 7100 Glossary
Advanced Dicing Technologies Ltd.
A-6
Supplier
ADT production personnel, field engineers and customer support
personnel.
Table
Rotating platform on which a Workpiece is mounted and held in place by
vacuum during processing.
Teaching
The System is taught Models. In Teach Alignment, the System is taught to
find the center of the streets to be cut and in Teach Kerf Check, the System
is taught which part of the kerf to inspect.
Technician
(formerly known as Keeper)
Middle-rank Access Level. Technicians have received training and are
experienced in performing the maintenance of the System. See also
Access
Level.
Theta (T) Axis
Theta components rotate around the T Axis. See also Axis. Also referred to
as Turntable, on which the cutting chuck is mounted.
UPS
(Un-interrupted Power Supply)
The backup power source that allows completion of the currently running
operation in the case of power failure.
Uni-directional Cutting
All cutting is performed in one direction (the Workpiece is fed into the
rotating Blade from left to right).
Upcut
The Blade enters the Workpiece from the bottom and exits from the top.
User
A general term to describe any person who operates, adjusts or maintains
the System, regardless of Access Level. See also
Access Level.
Wash Pipe
A metal pipe mounted on the Dicer and intended for cleaning the
Workpiece before, after or while dicing.
WMax
Maximum Kerf width.
WMin
Minimum Kerf width.
Work
Workpiece(s).
Workpiece
Also known as a wafer, substrate, semiconductor material or work.