Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Recipe Problems
P/N 97100-9002-000-14 Ver 06/05
10.2-1
10.2 Recipe Problems
If the system reports a recipe problem (e.g. missing model message), the
user can try doing the following:
• Check the recipe parameters.
• Ensure that the active recipe and the workpiece on Dicer fit. If they do
not fit, either redefine the job, or unload and reload the workpiece.
• Reteach Alignment.
• Recreate the recipe (in some cases, the user has to create the recipe
from scratch because the file itself is corrupted). It is important to use
a working recipe or template, and not the corrupted file for duplication.