Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Error Message Information
P/N 97100-9002-000-14 Ver 06/05
10.1-1
10.1 Error Message Information
Error messages, described in the Model 7100 Maintenance Manual, can be
used to help diagnose problems that occur while operating the System.
Each error message is divided by three fields:
• Main Field
• Details Field
• Troubleshooting
The user can identify the problem source using the data given in the Main
Screen and the Details Screen. The Troubleshooting Screen contains
specific steps that may help solving the problem. The Troubleshooting
steps are numbered as separate tasks. The first step is the most likely to
solve the problem.
The color of the error massage frame indicates to which type the error
belongs:
• Green - user interference is required (e.g. change blade)
• Yellow - user interference is required to verify if the system is
functioning properly
• Red - user interference is required due to a serious problem (e.g.
software, machinery)
The errors are also indicated by the Light Tower (if installed). For more
details about the Light Tower states, see
section 2.1.3.
If a problem occurs that cannot be resolved using the details and/or
troubleshooting information, write down the information displayed in the
Error Details field of the error message and the Details pane before
contacting the ADT service representative.
Note: If there is an error, the Light Tower indicator in the lower-right corner of
the GUI screen blinks red. To display an error message, double-click the
indicator.