Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Wash Pipe
P/N 97100-9002-000-14 Ver 06/05
9.4-5
9.4.3 Model 7100 Fortis and ProFortis
The optional Wash Pipe is not included in the Model 7100 Fortis/ProFortis
default configuration, so the sensor is not connected to the System, and no
GUI indication is provided (see
Figure 9-31).
However, the optional Wash Pipe can be installed on the Model 7100
Fortis/ProFortis as an option. In this case, once the water flow sensor is
connected to the System, the GUI indicator is displayed as shown in
Figure 9-32.
Figure 9-31: No Water Flow Indicator
Figure 9-32: Wash Pipe Water Flow Indicator