Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Wash Pipe
P/N 97100-9002-000-14 Ver 06/05
9.4-3
To Activate the Wash Pipe
1 Click User > Configuration. The Configuration screen appears.
2 Scroll down to the Wash Pipe.
3 Set the value to Yes.
4 Click Save. The Wash Pipe option is now active.
9.4.1 Manual Operation
The Wash Pipe feature can be activated manually, using the Wash Pipe
icon (see
Figure 9-29) in the GUI Toolbar. Once this icon is pressed, the
washing procedure is activated.
The following operation options are available through the wash pipe
activation window (see
Figure 9-28):
• Pause - Stops the wash pipe activation and restarts the countdown to
the next activation
• Stop - Cancels the wash pipe activation until the next cut is
performed.
Figure 9-28: Stop and Pause Wash Pipe Operation