Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Autoloader
P/N 97100-9002-000-14 Ver 06/05
9.1-11
• Initiate the MHS:
Click MHS Init to initiate the the whole Material Handling System.
• Initiate the Linear Axis:
Click Linear Axis Init to initiate the Linear Axis.
• Elevate or Lower the Curtain:
• Click Close to elevate the Curtain.
•Click Open to lower it.
The following parameters can be defined in the upper right pane for the
Linear Arm:
• Fast velocity - velocity, at which the Arm moves when the button
between the arrows (see above) is set to (F).
• Acceleration
• Slow acceleration
• Deceleration
• Kill deceleration
• Self test delay
• Linear axis air
Figure 9-8: MHS Axes Screen