Installation guide

Autoloader
Advanced Dicing Technologies Ltd.
9.1-4
Most Autoloader features are implemented in two dedicated Workbooks:
MHS (see
section 9.1.2.2), which monitors and controls the Pick-Up Arm,
and CassComp (see section 9.1.2.1), which monitors and controls all other
aspects of the Autoloader.
In the User field two Status Indicators are added:
Next to each Status Indicator there are three virtual LEDs:
• Red: An error/failure exists. The system stops working and an error
message appears on the screen.
• Yellow: User assistance required. A message appears on the screen.
• Green: When blinking, the station is carrying out an operation.
Otherwise, green indicates that the station is in idle mode.
Linear Arm status indicator.
Cassette Compartment status indicator.
Cassette Compartment Simulation