Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Language Selection
P/N 97100-9002-000-14 Ver 06/05
8.2-1
8.2 Language Selection
The Model 7100 is supplied with an option to change the GUI language.
The software supports one local language and English (default).
To Activate the Feature
1 In the menu bar click User > Language. The Language local selection
screen is displayed (see
Figure 8-5).
2 Set one of the local languages to Yes. The system is now set up to
support English and another pre-defined language. The Multi
Language button
is displayed on the Toolbar.
Pressing the Multi Language button switches between the languages.
To Switch Between the GUI Languages
1 Click to enter the Maintenance mode.
2 Click the Language Change button in the toolbar .
3 Select the required interface language.
4 Click Save. A pop-up dialog box appears informing the user that after
saving the changes, the system will exit to Windows, and the user will
need to restart the GUI.
Figure 8-5: Language Local Selection Screen
Note: The changes will apply only after the computer is restarted. If the User
decides not to restart the computer, the language setting will not change.