Installation guide

Specifying Recipe Parameters
Advanced Dicing Technologies Ltd.
5.4-10
To Modify Parameter Values:
1 In the Parameter Table, double-click the Value cell of the parameter
to be modified. If the User can choose from among a list of preset
values, a drop-down list with those values appears in the cell.
Otherwise, a blinking cursor appears.
2 Select a value from the drop-down list or enter the value directly. Only
values within the min and max range are valid.
3 Click . The new settings are saved to the Recipe.
5.4.3.2.3 Deleting Parameters
Parameters can be deleted from the Recipe by performing the following
procedure.
To Delete Parameters from the Recipe:
1 Select a parameter in the Parameter Table. Any cell on the line,
including the parameter name, can be selected.
2In the Parameter area, click Delete. The selected parameter is
deleted from the Parameter Table.
If more than one index was defined for the parameter, clicking Delete
deletes the value for the selected index. (Click Delete additional times
to delete other indexes, where applicable.)
3 Click to confirm the deletion of the parameter or to cancel the
procedure and restore the parameter to its previous value.