Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Specifying Recipe Parameters
P/N 97100-9002-000-14 Ver 06/05
5.4-3
Loop cut Defines how to cut using repetitive patterns.
Manual Inspection Defines the regularity of Automatic Inspection and the
Inspection Illumination settings.
Model Processing Contains parameters for special model processing
models with a variation in gray levels.
Multi-panel Contains parameters required for Multi-panel
applications.
Override Defines how the System performs Dressing Using
Override.
Shrinkage Contains parameters used when dicing substrates that
suffer from shrinkage.
Teach Center Defines whether the workpiece is centered on the
Chuck.
Tilted Spindle Contains parameters used by the Tilted Spindle
Option.
Y Offset Defines location and limits for Y Offset procedure.
Table 5-3: Parameter Categories
Parameter Category Description