Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Defining Recipe Properties
P/N 97100-9002-000-14 Ver 06/05
5.3-7
To Define a new blade:
1 Click once in the Value cell of the blade property to display a browse
button
.
2 Click the browse button to display the Blade Properties screen (see
Figure 5-8).
3 Select a blade that has the most similar properties to the blade you
want to define.
4 Click Duplicate Blade. The Duplicate Blade dialog box appears.
5 Enter the name of the new blade and click OK.
6 Change the appropriate Values of the new blade.
7 Click Save .
5.3.2.3 Modifying Blade Properties
The properties of a blade can be modified in the Blade Properties screen by
performing the procedure described below.
To Modify Blade Properties:
1 In the Blade Properties screen, double-click the Value cell for a
property and enter the appropriate value.
2 Repeat step 1 for as many properties as required.
3 Click Save.
4 Click OK to return to the Recipe properties in the Programming
Workspace.
Figure 5-9: Duplicate Blade Dialog Box
Note: When properties are modified, a Save button is displayed below
the blade properties.