Installation guide

ADT Model 7100 Semi-Automatic Dicing System Operations Manual
Creating a New Recipe
P/N 97100-9002-000-14 Ver 06/05
5.2-1
5.2 Creating a New Recipe
When first installed, the Model 7100 software contains the following
Default Recipes:
• APC Standard Template (for details, see section 5.6.1)
• APC Loop Cut Template (for details, see section 5.6.2)
• GPC Standard Template (for details, see section 5.6.3)
• GPC Multi Die Size Template (for details, see section 5.6.4)
• Standard Dressing Template (for details, see section 5.6.5)
• GPC Dressing Template (for details, see section 5.6.6)
These Default Recipes cannot be deleted or changed. They can be used as is
or as a template for new Recipes. New Recipes are created by duplicating
an existing Recipe. The new Recipe initially has the same properties and
parameters as the old one, but these can be modified as required.
To Create a New Recipe:
1 Click to display the Programming Workspace.
2 Select an existing Recipe from the Programming tree.
3 Click the Duplicate Recipe button at the bottom of the Programming
Workspace to display the following:
4 Enter a name for the new recipe in the New recipe name field and
select or create a different group if required from the drop-down list. To
Figure 5-3: Duplicate Recipe Dialog Box