User`s guide

AXIS 700

User’s Guide Configuring the AXIS 700

Configuring the AXIS 700

Before the AXIS 700 can be used for distributing scanned documents on your network, you must

specify these settings:

• Network settings

Parameters for the TCP/IP and SMTP protocols, using a wizard or setting manually

• Destinations

E-mail addresses and file directories

Note:

Optionally, you can also customize these settings. However, when installing the AXIS 700 for the

first time, you can simply keep the defaults.

• System settings

System information, Administrator password, user privileges, language etc.

• Scanning profiles

• Paper sizes

Note:

Accessing the Administration Tools

You can access the Administration tools for configuring the AXIS 700 from a standard Web

browser, such as Netscape Navigator or Internet Explorer.

1. Start your Web browser.

2. Enter the name or Internet address of your AXIS 700 in the location/address field.

If you used the AXIS 700 control panel, DCHP or BOOTP for downloading the Internet

address, the required network settings will be set automatically. However, you are recommended

to verify the settings from the Web browser interface.

Refer to the User’s Manual for information on the settings for scanning profiles and paper sizes.