User`s guide

AXIS 70/70U User’s Guide Using the AXIS 70/70U

1. Press Menu repeatedly until the

Sent by: prompt is shown on the mes-

sage display.

2. Use to select any destination name as the registered sender.

Notes:

*The parameter specify the sender of scanned documents is set

Receive your own copy

If the Administrator has enabled the Cc-feature you will receive a copy of the

e-mail if:

• you are logged in to the AXIS 70/70U and have received a valid e-mail

address from the authentication server

- or -

• you have entered your e-mail address in the sent by: prompt

If none of the above, the copy will be sent to the default Cc-address entered by

the administrator.

Receive notification of sent e-mail

The Administrator can enable one or both notification parameters:

• Notify sender when a message has been delivered (requires that your

mail server supports extended SMTP and Delivery Notification Status)

• Notify sender when a message has been read (requires that the recipi-

ent’s e-mail client supports Message Disposition Notification. The recipi-

ent can also discard the request without notifying the sender)

For security reasons this feature is only enabled when the user is logged in

and the AXIS 70/70U has received a valid e-mail address from the

authentication server.

This does not apply when user authentication is enabled as the sender is automatically set to the

logged in user and can not be changed.

Administrators are referred to Specifying System Settings, on page 18 for information on how to

configure normal user privileges.