User`s guide

Basic Installation AXIS 70/70U User’s Guide

8. Press Select to edit the default router address:

9. To change the value, repeat steps 4 - 6 above.

10.Press Menu to display the subnet mask setting:

11. Press Select to edit the subnet mask:

12.To change the value, repeat steps 4 - 6 above.

13.Press Menu to display the node address. This address is not editable. The

node address should be equal the AXIS 70/70U serial number found on the

underside label of the unit.

14.Press Menu once more to display the final instructions:

15.Press Select to exit the network settings. The AXIS 70/70U then completes

the startup sequence.

16.Write the name or IP address of the AXIS 70/70U on the supplied instructions

label and attach it to the top cover.

The unit is ready for use when the Status indicator stops flashing and remains

lit.

Note:

If you make a mistake when editing the parameters, press the Cancel button to cancel the

previous operation.