User`s guide

AXIS 5470e/570/670e User’s Guide Management and configuration
45
For more information, please refer to the AXIS ThinWizard on-line help.
Using AXIS Print System
AXIS Print System is the recommended management tool to use for network printing in Windows
95/98/NT & 2000 in small office environments.
The AXIS Print System software can be downloaded from the AXIS Product CD and from the Axis
WWW home page at http://www.axis.com/. For more information please refer to the AXIS
5470e/570/670e User’s Manual.
Using AXIS NetPilot
The AXIS NetPilot configuration software provides an alternative tool for conveniently configuring
and monitoring of the AXIS 5470e/570/670e. It can be installed on Windows platforms running
NetBIOS/NetBEUI or NetWare clients running IPX.
The AXIS NetPilot software can be downloaded from the AXIS Product CD and from the Axis
WWW home page at http://www.axis.com/.
Using the Test Button
The following operations can be performed by pressing the test button in different sequences.
Please refer to Product Overview, on page 4, to identify the location of the test button.
Printing a test page:
• Press the test button once to print a test page.
Printing the parameter list:
• Press the test button twice to print the parameter list.
Resetting the AXIS 5470e/570/670e parameters to the factory default settings:
1. Remove the external power supply to switch off the AXIS 5470e/570/670e.
2. Press and hold down the test button, while you reconnect the external power supply. Continue
to hold down the test button until the network indicator starts to flash at one second intervals.
This should take about 5 seconds.
3. Release the test button and wait until the network indicator flashes at least five times.
4. Press and hold down the test button again until the network indicator remains constantly lit.
5. Restart the AXIS 5470e/570/670e by disconnecting and reconnecting the external power
supply.