User`s guide

Setup for Macintosh AXIS 5470e/570/670e User’s Guide
38
The following example describes the how to set the AXIS 5470e/570/670e parameters in Apple-
Tal k.
Important:
1. Open the Chooser.
2. Select a network printer driver, any LaserWriter will do.
3. Select the printer port which name ends with "_CFG".
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText. Write a text file containing the parameters you want to set:
Parameters that you do not want to set should be excluded from the text file. Refer to the
Parameter List in the AXIS 5470e/570/670e User’s Manual for information about which values
that are valid for each parameter.
6. Print the text file. The settings will be stored in the print server.
7. Open the Chooser and select the printer port you wish to use for printing documents.
8. Close the Chooser.
DO NOT use the parameter values from this example when configuring your AXIS
5470e/570/670e. You should select values that are appropriate for your printers and network
settings.