User`s guide

Setup for NetWare AXIS 5470e/570/670e User’s Guide

Queue-based NetWare Printing (IPX)

AXIS NetPilot is the recommended tool you should use when you are installing the AXIS

5470e/570/670e in the NetWare (IPX) environment. Install the AXIS NetPilot software if you

have not already done so. It is supplied on the AXIS Product CD and can also be downloaded from

the Axis WWW home page on http://www.axis.com/

Note:

Follow the instructions detailed below to install your AXIS 5470e/570/670e using the AXIS

NetPilot Installation Wizard:

1. Start AXIS NetPilot by double-clicking the AXIS NetPilot icon. The icon is located in the

folder where AXIS NetPilot was installed.

2. Locate the AXIS 5470e/570/670e in the ‘New Axis Units’ folder. Select it and click the Install

button on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds

before the print server appears in the folder.

3. Choose the with Installation Wizard option and click OK. The Installation Wizard will then

guide you through the installation process. Should you require assistance with any of the

operations click the Help icon and follow the instructions provided in the Help window.

4. After you have completed the installation, you must use the Add Printer Wizard to install the

printer on your client. When installing, choose Network Printer and browse to the queue you

have just created. Alternatively, choose Local Printer and select the queue you have just

captured. When you have completed the instructions on the screen you are ready to print in

your NetWare environment.

Connecting additional print queues

Follow the instructions below to enhance your installation by adding extra print queues:

1. In the AXIS NetPilot, select the Network Print Server to be set up by clicking its icon.

2. Choose Network from the Setup menu or click the Network button on the toolbar.

3. Select the NetWare tab, select the printer port and click the Connect... button.

4. A new window opens that allows you to create new print queues and connect print queues to

the AXIS 5470e/570/670e.

The AXIS NetPilot software must be installed on a Windows platform running a NetWare client.