User`s guide

Setup for NetWare AXIS 5470e/570/670e User’s Guide
32
NetWare Using NDPS over IPX
Installing the AXIS 5470e/570/670e as a Public Access printer:
1. Make sure that the NDPS Gateway is configured to automatically create a public access
printer.
2. Connect the AXIS 5470e/570/670e to the NetWare network, if it is not already connected.
Refer to Connecting the Printer to the Network, on page 8 for more information.
3. Use the AXIS NetPilot to set the HP_JETADMIN parameter of the AXIS 5470e/570/670e to
Yes. The HP_JETADMIN parameter must be set to enable communication between the AXIS
5470e/570/670e and the NDPS Gateway. Please refer to Using AXIS NetPilot, on page 45.
Please refer to the appropriate Novell documentation for instructions on creating NDPS Manager
objects and the NDPS printers.
Notes:
You can also set the HP_JETADMIN parameter of the AXIS 5470e/570/670e to Yes via any
standard web browser. Please refer to Using a Standard Web Browser, on page 43.
The Public Access print servers are immediately available for everyone on the network.
The Axis Gateway will appear in NetWare 5.1 and later releases. To use the Axis Gateway with
earlier versions of NetWare, you can download the Axis Gateway Configuration utility from
www.axis.com.
To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using
IPX/SPX, Axis print server firmware 5.51 or later is needed.