User`s guide

AXIS 5470e/570/670e User’s Guide Setup for Windows 95/98, 2000 & NT

Setup for Windows 95/98, 2000 & NT

TCP/IP Printing using AXIS Print System

AXIS Print System is the preferred utility for installing TCP/IP printers in Windows 95, Windows

98, Windows 2000 and Windows NT 4.0. AXIS Print System allows you to locate and install

network printers. If you choose Custom Installation while installing the AXIS Print System, you

will be able to set the IP address of the AXIS 5470e/570/670e using the comprised AXIS IP

Installer.

For peer-to-peer printing, AXIS Print System must be installed on all printing clients, while it is

only necessary to install it on the server for client-server printing.

Install the AXIS Print System software, if you have not already done so. The latest AXIS Print

System software is available on the Axis WWW home page at http://www.axis.com/

You will need firmware 6.0 or later in your AXIS 5470e/570/670e print server. AXIS firmware is

available on the AXIS Product CD and the Axis web site. Once installed, the AXIS Print System is

automatically initialized on system start-up.

To install a printer with the AXIS Print System, use the Installation Wizard that is available from

the AXIS Print System user interface. If you need help, please see the AXIS Print System’s built-in

Help system or refer to the User’s Manual.

Notes:

• For TCP/IP printing in Windows NT 3.5x environments, you should use the AXIS Print Monitor.

• In Windows NT and Windows 2000, the user needs sufficient access rights on the domain

server in order to manage printers on local computers via Axis Print System.