User`s guide

AXIS 5470e/570/670e User’s Guide Mainframe IPDS over PPR/PPD Printing

Mainframe IPDS over PPR/PPD Printing

Note:

Configuring the Mainframe host

1. Specify the TCP/IP address space name.

2. Define the Communication Control Unit, e.g. 3172, to MVS.

3. Modify the TCP/IP profile on your MVS system, if necessary.

4. Verify the communication between the AXIS 5470e/670e and the IBM Mainframe, by pinging

the AXIS 5470e/670e from the host.

5. Define the AXIS 5470e/670e as a writer-controlled printer to JES2 or to JES3.

JES2 Example:

JES3 Example:

In the example above JNAME=PRT1 have been used.

6. Define the printer to PSF with a PRINTDEV statement, including the IP address and port

number.

Please, refer to the AXIS 5470e/570/670e User’s manual for a more comprehensive description of

the setup procedures. The AXIS 5470e/570/670e User’s Manual is available from the AXIS

Product CD or the Axis Website at http://www.axis.com

Some AXIS 5470e versions are not available with IPDS. Please refer to Product Model Summary, on

page 7.

FSS (FSS1) PROC=SAMPPROC,HASPFSSM=HASPFSSM,

PRT1 FSS=FSS1,MODE=FSS,PRMODE=(LINE, PAGE,),

CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100,

START=YES,MARK=NO,TRKCELL=YES

FSSDEF,TYPE=WTR,FSSNAME=FSS3,PNAME=SAMPPRO3,SYSTEM=SYS1, TERM=NO

DEVICE,DTYPE=PRTAFP1,JNAME=PRT1,JUNIT=(,SYS1,,ON),FSSNAME=FSS3,

MODE=FSS,PM=(LINE,PAGE,),CHARS=(YES,GT12),

CARRIAGE=(TES,A868),CKPNTPG=100,HEADER=YES,WC=(C)