User`s guide

Mainframe TN3270E Printing AXIS 5470e/570/670e User’s Guide
24
Verifying the Communication
Follow the instructions below to verify communication from the AXIS 5470e/570/670e to the
Mainframe host via the SNA Server:
1. Activate the connection you created in step 2 of the above SNA Server - AXIS 5470e/570/670e
connection procedures. The status of the connection should be “active”.
2. Make sure the corresponding LU in the host is activated.
3. Activate the TN3270 connection to the AXIS 5470e/570/670e. The LUA should change
status to SSCP.
4. Send a print job from the host.
The AXIS 5470e/570/670e is now ready for use.
Note:
You can check the status of the TN3270E connection by printing a test page from the print server.
This is done by pressing the test button once. Make sure the TN3270E status (St:) line for your
server connection is defined as either:
- SSCP
- LU-1
- LU-3