User`s guide

AS/400 TN5250E Printing AXIS 5470e/570/670e User’s Guide

3. Click the Configuration Wizard for IBM sessions button.

4. Click the Add Session button. This takes you to the Configuration Wizard which is a

step-by-step guide through the required configuration settings.

Verifying the communication link

1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first four characters of the printer

device name, on the AS/400 command line. A list of printer devices will be displayed. Make

sure that a virtual printer device is active.

2. Direct a printout to this printer device to check the integrity of the communication link.

3. Press the AXIS 5470e/570/670e test button once to print a test page. Make sure that the

TN5250E status is defined on the test page as

Idle, Actv or LU-1.