User guide

ProJet

x60Pro Series User Guide ProJet x60Pro® Series Overview

5/12/13

Operating Environment

Ambient Temperatures

Ambient Relative Humidity

• Maximum Temp. Range: 50-80° F (10 - 26.6° C)

• Recommended Temp. Range: 55-75° F (12.7 -

23.9°C)

• Maximum RH Range: 15 - 60%, non-condensing

• Recommended RH Range: 20 - 55%, non-condens-

ing

(May experience sub-optimal performance at extremes.)

Build Volume ProJet 660Pro

• 10” x 15” x 8” (254 mm x 381 mm x 203 mm)

• 1200 cubic inches build capacity

ProJet 860Pro

• 15” x 20” x 9” (381 mm x 508 mm x 229 mm)

• 2700 cubic inches build capacity

Build Speed 2-4 layers per minute

Layer Thickness .0035” - .004” (.089 - .102 mm)

Resolution 600 x 540 dpi print resolution

Noise Levels Both models

• During Printing = 57dB

• Emptying Overflow = 66dB

• Vacuuming - Cover Open = 72dB

ProJet 660Pro

• Fine Cleaning - onboard Post-Processing Unit =

72dB

CSA, CE Approval Pending: CE certification and UL listing.

Power Requirements Both models

• 100V, ~50-60 Hz, 15 Amp.

• 115V, ~50-60 Hz, 15 Amp.

• 230V, ~50-60 Hz, 8 Amp.

Note: At 100-115V, a 20A circuit is required and the sys-

tem ships with the appropriate 20 A plug. Due to high

amperage, a dedicated circuit is strongly recommended.

Approximately 78 watts are required when the printer is in

Sleep mode.