User guide

ProJet

860Pro User Manual Troubleshooting the ProJet x60Pro

5/12/13

7.12.2 Binder Cartridge is Full But 3DPrint Indicates Empty

Explanation: This is usually caused by a damaged binder cartridge, or a failure in the binder cartridge

pocket.

Solution:

• Remove and reseat the binder cartridge. Check the following:

• Be sure it’s the correct cartridge for that pocket.

• Check the label to be sure it’s oriented correctly.

• Snap it fully into place in the pocket.

If that doesn’t solve the problem, try a new binder cartridge.

If a new binder cartridge doesn’t solve the problem, contact your Service Provider.