User guide

ZPrinter

850 User Manual Printer Maintenance

5/12/13

5. Using the pick from the Accessories Kit, reach below the slow axis rail and carefully remove any debris

or Core from the teeth of the pulley. Slide the fast axis assembly forward and back to rotate the pulley

and expose all the teeth. Also clean any buildup or debris from the end of the rail.

6. Repeat this for the pulley at the other end.

7. Vacuum or sweep up any debris that fell.

8. Slide the deck back into position.

Number Component

1 Slow Axis Rail

2 Pulley

3 End of Rail