User`s guide

Setup for UNIX AXIS 570/670 User’s Guide
30
Setting the IP address
Follow the instructions below to set the IP address:
1. Open the Chooser and select a network printer driver. Any LaserWriter will do.
2. Select the printer port which name ends with “_CFG” and close the Chooser.
3. Open a text editor, e.g. SimpleText and write a text file containing the following:
INT_ADDR: <IP address>
Example:
4. Print the above text file. The settings will be stored permanently in the print server.
5. Open the Chooser and select the printer port you wish to use for printing documents. Close
the Chooser.
Important!
Setup for UNIX
axinstall
Use the Axis automatic installation script axinstall to integrate the AXIS 570/670 into your host
spooler. This utility software is resident on the AXIS 570/670 and can be downloaded using FTP.
It is also provided on the AXIS Online CD in the software\prt_srv\utility\axinstall\latest folder.
Follow the procedure below to download axinstall to your host using FTP:
1. Log in to the AXIS 570/670 by typing:
ftp <host name> or ftp <IP address> in the UNIX shell window.
2. Enter root as the user id and pass as the password.
3. Download the axinstall utility by typing: get axinstall
Follow the instructions below to install the AXIS 570/670 using the axinstall script:
1. Type the command:
sh axinstall in the UNIX shell window.
2. Follow the instructions that appear when the script is started.
When the AXIS 570/670 is installed, it will appear as if it is directly connected to the host printer
spooler.
INT_ADDR: 171.16.2.143
The _CFG port disappears 60 minutes after the AXIS 570 or AXIS 570e has been powered on. If you want it to
reappear, you must restart the print server.
UNIX
Macintosh