User`s guide

AXIS 570/670 User’s Guide Setup for NetWare 27
As soon as the HP Gateway finds the AXIS 570/670, it will automatically create a public access
printer, which is found with the Novell Printer Manager. All users have access to the public access
printer.
By using the NetWare Administrator software, you can easily configure your Public Access Printer
to become a Controlled Access Printer.
Note:
Setup for NetWare
AXIS NetPilot is the tool you should use when you are installing the AXIS 570/670 in the
NetWare environment. Install the AXIS NetPilot software, if you have not already done so. It is
available on the AXIS Online CD.
Note:
Follow the instruction below to install your AXIS 570/670 using the AXIS NetPilot Installation
Wizard:
1. Start AXIS NetPilot by double-clicking the AXIS NetPilot icon. The icon is located in the
folder where AXIS NetPilot was installed.
2. Locate the AXIS 570/670 in the ‘New Axis Units’ folder. Select it and click the Install button
on the AXIS NetPilot toolbar. If your network is large, it could take a few seconds before the
print server appears in the folder.
3. Choose the with Installation Wizard option and click OK. The Installation Wizard will then
guide you through the installation process.
Should you require assistance with any of the operations, click the Help icon and follow the
instructions provided in the Help window.
After you have completed the installation you are ready to print in the NetWare environment.
Connecting additional print queues
Follow the instructions below to enhance your installation by adding extra print queues:
1. Select the Network Print Server to be set up by clicking its icon.
2. Choose Network from the Setup menu.
3. Select the NetWare tab, select the printer port and click the Connect... button.
NDPS requires that you run NetWare 4.11 or higher.
The AXIS NetPilot software must be installed on a Windows platform running a NetWare client.
NetWare