User`s guide

Mainframe IPDS over PPR/PPD Printing AXIS 570/670 User’s Guide
24
Configuring the AXIS 570e/670e
Follow the instructions below to configure your AXIS 570e/670e using a standard Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
2. Enter the IP address or the host name of the AXIS 570e/670e in the location field and press
the Enter key on your keyboard. The internal Web pages of the AXIS 570e/670e appear. You
may be asked to enter a user name and a password. The default values are root and pass.
3. Click the Configuration button.
4. Select TCP/IP from the header.
5. The Reverse Telnet parameters PR1, PR2 and PR3 are by default setup for IPDS data streams,
emulating an IBM 4028 printer model 1 on the port numbers 5001, 5002 and 5003
respectively. If you need to change a port number, enter a new number in the text field and
click the Submit TCP/IP settings button. Otherwise you do not have to do anything.
6. Select IBM IPDS SETTINGS settings from the header.
7. Select your preferred system language from the IPDS System Language drop-down list.
8. Click the Submit IBM IPDS Configuration settings button.
9. Select IBM IPDS PRINTER DRIVER from the header.
10. Select the appropriate page properties and click the Submit IBM IPDS PRINTER DRIVER
settings button.
Verifying the communication
By sending a print job from the Mainframe to the AXIS 570e/670e, you can verify that the setup
procedures have been performed correctly and that communication is established.
IBM Mainframe