User`s guide

AS/400 IPDS over PPR/PPD Printing AXIS 570/670 User’s Guide
14
Creating a PSF Configuration
Follow the instructions below to create a PSF configuration:
1. Issue the command CRTPSFCFG.
2. Press F11 to display keywords.
3. Select a name for the PSF configuration and enter it at the
PSF configuration
(PSFCFG)
line. The name may comprise the letters A-Z and the numerals 0-9, but must
begin with a letter. A maximum of 10 characters are allowed.
4. Enter
QGPL at the Library line.
5. Enter
*YES at the IPDS pass through (IPDSPASTHR) line.
6. Enter
*NORDYF at the Activate release timer (ACTRLSTMR) line.
7. Enter
*NOMAX at the Release timer (RLSTMR) line.
8. Press the Enter key on your keyboard to create the PSF configuration.
Creating a Printer Device Description
Follow the instructions below to create a printer device description:
1. Issue the command CRTDEVPRT.
2. Select a name for the printer device and enter it at the
Device Description (DEVD) line.
The name may comprise the letters A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed.
3. Enter
*LAN at the Device class (DEVCLS) line.
4. Enter
*IPDS at the Device type (TYPE) line.
5. Enter
0 at the Device model (MODEL) line.
6. Enter
*IP at the LAN attachment (LANATTACH) line.
7. Enter a port number at the
Port number (PORT) line. The default port numbers are
defined in the table below:
Port
Number
Data Stream/
IPDS Printer Emulation
Logical Printer
Destination
5001 IPDS_4028_1 PR1
5002 IPDS_4028_1 PR2
5003 IPDS_4028_1 PR3
IBM AS/400