User`s guide
AXIS 570/670 User’s Guide SNA Printing in the AS/400 environment 9
10. Use the command WRKCFGSTS *CTL xxxx*, where xxxx is the first 4 characters of the
AXIS 570/670
LU Name
, to delete any previously created Controller and Device descriptions
specific to your AXIS 570/670. Delete the Device Descriptions (indented text) first and then
the Controllers. You can print a test page if you are unsure of the AXIS 570/670
LU Name
.
Configuring the AXIS 570/670
Important!
Follow the instructions below to configure the AXIS 570/670 using a Web browser:
1. Complete the Configuring the AS/400 Host System procedures on page 8.
2. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.
3. Enter the IP address or the host name of the AXIS 570/670 in the location field and press the
Enter key on your keyboard. The internal Web pages of the AXIS 570/670 appear. You may be
asked to enter a user name and a password. The default values are root and pass, respectively.
4. Click the Configuration button.
5. Select SNA from the header.
6. Select 5494 from the 3174/5494 Emulation Parameter drop-down list.
7. Enter the SSAP in the Local SAP value text field.
8. Enter the Local network ID in the Local 5494 Network Name text field.
9. Enter the Local adapter address in the Host MAC address text field.
10. Enter the Local network ID in the Host Network Name text field.
11. Enter the Default local location in the Host LU Name text field and click the
Submit SNA settings button.
Depending on your choice of data streams, continue the installation by selecting the appropriate set
of instructions below:
IPDS data streams (AXIS 570e and AXIS 670e only)
1. Select IBM IPDS Configuration from the header.
2. Select your preferred system language from the System Language drop-down list and click the
Submit IBM IPDS Configuration settings button.
3. Select IBM IPDS Printer Driver from the header.
To perform the instructions presented in this section, you should first assign an IP address to your AXIS 570/670
using one of the methods presented in Assigning an IP address, on page 7. If your network does not support the
TCP/IP protocol suite, you can still configure the AXIS 570/670 using the AXIS Netpilot™ installation tool.
IBM AS/400