Installation guide

Create a Print Queue (OS/2 version 2.x and above):
1. Double-click the Templates folder, then drag the Printer icon out
to the Workplace Shell (or into a folder) while holding the right
mouse button down.
2. Type a name of your choice in the Name field.
3. Select \PIPE\<name>.MIO from the Port list, and select a printer
driver suitable for your printer from the Standard Printer list.
4. Click OK to confirm the printer definition.
Print queue sharing:
Open an OS/2 window and issue the following command:
NET SHARE queue_name /PRINT, where queue_name is the
name of the queue to be created.
Important note:
❏ AXIS Print Utility for OS/2 must be running when you print
through your AXIS 570/670 MIO. We strongly recommend
that you copy the AXIS Print Utility icon into your StartUp file.
SNA
The AXIS NetPilot™ can be used to setup SNA and IBM
emulation parameters in the AXIS 570/670 MIO. To configure your
IBM host please refer to Section 3 of the AXIS 570/670 MIO User’s
Manual.
Web Management
After setting the Internet Address and Host Name in the AXIS
570/670 MIO, as described in the UNIX section of this document,
you are then able to access your AXIS 570/670 MIO from any
standard Web browser. To do this simply enter the Internet Address
of the AXIS 570/670 MIO as a URL in your browser, as follows:
http://192.36.253.96,
or
http://salesdept
The Home Page of the AXIS 570/670 MIO will now be displayed in
your browser, where links to the AXIS 570/670 MIO Configuration,
Management, Status, Account, and Help services are readily
available.
UNIX
SNA
UNIX
Internet