User`s guide

Section 5: Setting Up - IBM Mainframe AXIS 5470e/570/670e User’s Manual
94
From an TSO session, enter the following command:
Note:
In JES2, enter the following command from the System Display and
Search Facility (SDSF) menu 6:
Note:
Here is an example of a successful ping:
And here is an example of an unsuccessful ping:
If the ping is not successful make sure the AXIS 5470e/570/670e is
configured according to the instructions in Assigning an IP address,
on page 32 and in Configuring the AXIS 5470e/570/670e, on page
78. If these items are all in order, consult your TCP/IP network
administrator.
TSO PING <IP_address>
The IP address is the IP address of the AXIS 5470e/570/670e.
ping <IP_address>
The IP address is the IP address of the AXIS 5470e/570/670e.
EZA0458I Ping V3R1: Pinging host 10.50.45.200
(Use ATTN to interrupt.)
EZA0463I PING: Ping #1 response took 0.055 seconds
Successes so far = 1
EZA0458I Ping V3R1: Pinging host 10.50.45.200
(Use ATTN to interrupt.)
EZA0464I PING: Ping #1 timed out