User`s guide

Section 5: Setting Up - IBM Mainframe AXIS 5470e/570/670e User’s Manual

The following table is a summary of a report generated by this

command for the example above.

Profile Name NWSAA

SNA Network ID: SEEDB

Peripheral node control point name: CPNAME

Block ID/PU ID: 05D 66204

Local/Partner SAP for ILUs: 04

Logical Adapter: E100B_1

PU Profile: NWSAAPU

Adapter Name E100B_1

Adapter Type: LLC 802.2

Terminate peer link if no active APPC sessions: No

Logical adapter number: 0

Number of local service access points: 2

Enable adapter at startup: Yes

PU Profile Name NWSAAPU

Number of dependent LUs: 8

Starting dependent LU number: 4

Peripheral node control point name: NWSAAPU

Node ID (block/PU ID): 05D 66204

Offline test mode: No

Assign only LUs activated by the host: Yes

Enable SDDLU Support: No

Adapter Name: E100B_1

Adapter Type: LLC 802.2

Maximum Session Count: 9

VTAM Name Prefix: BRLTST

Default LU Type: 1