User`s guide

Section 5: Setting Up - IBM Mainframe AXIS 5470e/570/670e User’s Manual
84
18. Leave the rest at their default settings.
PU Profile name & Logical adapter
19. Click the LU Defaults icon. The panel below will appear
20. Set Default LU category to Public.
21. Set Default LU type to Printer (LU type 1 or 3).
22. Specify the VTAM LU name prefix. Click OK.
Notes:
• When the LUs are created the default names for the Printer Devices will be
<name prefix> followed by a two digit number starting at the number you
entered in the starting dependent LU number field (refer to step 13 above).
• In the example below, eight LUs are created automatically. The LU names
created will be BRLTST04 through to BRLTST0B. These names must
correspond to the Printer Names you specify for the TN3270E sessions in
the Print Server.