User`s guide

Section 5: Setting Up - IBM Mainframe AXIS 5470e/570/670e User’s Manual
82
NetWare for
SAA Server
To set-up a TN3270E connection to the AXIS 5470e/570/670e you
have to set up PU and LU definitions. This is done by following the
steps below:
1. Start the NWSAA Administrator.
2. Double click on the NWSAA Node. The panel below will appear.
3. Enter the Node ID for the host.
4. Leave the rest at their default settings.
Peer PU profile
5. Click on the TN3270 icon. The panel below will appear.
6. Select All Available Host PU profiles.
7. Enter the user name, from the User List, that you want all
TN3270 clients to use.
8. Specify the maximum number of TELNET connections you want
to allow each TN3270 client.