User`s guide

AXIS 5470e/570/670e User’s Manual Section 5: Setting Up - IBM Mainframe
75
2. Enter the IP address or the host name of the AXIS
5470e/570/670e in the location field and press the Enter key on
your keyboard. The internal Web pages of the AXIS
5470e/570/670e will appear.
Note:
3. Click the Configuration Wizard for IBM sessions button.
4. Click the Add Session button. This will start the Configuration
Wizard which is a step-by-step guide through the required
configuration settings.
Verifying the
Communication Link
The easiest way to test the communication is by sending a print job to
the AXIS 5470e/570/670e. If there are problems, press the test button
once to print the test page where you can find the present SNA link
status.
To protect the admin pages and the Configuration Wizard from unauthorized
use, enter a password (default Pass) in the Root Password field under admin |
General Settings.