User`s guide

AXIS 5470e/570/670e User’s Manual Section 4: Setting Up - AS/400
59
Example:
Creating a Printer
Device Description
Create a printer device description by following the instructions
below:
1. Issue the command CRTDEVPRT and press Enter.
2. Press F11 to display keywords.
3. Select a name for the printer device and enter it at the
Device
Description (DEVD)
line. The name may comprise the letters
A-Z and the numerals 0-9, but must begin with a letter. A
maximum of 10 characters are allowed. In the following
instructions the printer device name will be referred to as
AXISPR1.
4. Enter
*LAN at the Device class (DEVCLS) line.
5. Enter
*IPDS at the Device type (TYPE) line.
6. Enter
0 at the Device model (MODEL) line.
7. Enter
*IP at the LAN attachment (LANATTACH) line.
Create PSF Configuration (CRTPSFCFG)
Type choices, press Enter.
PSF configuration........PSFCFG > AXISPR1
Library . . ......... >QGPL
User resource library list...USRRSCLIBL *JOBLIBL
Device resource library list . . DEVRSCLIBL *DFT
+ for more values
IPDS pass through........IPDSPASTHR > *YES
Activate release timer.....ACTRLSTMR > *NORDYF
Release timer. .........RLSTMR > *NOMAX
Restart timer. .........RESTRTMR *IMMED
APPC and TCP/IP retry count. . . RETRY 15
Delay between APPC retries...RETRYDLY 90
Automatic session recovery...UAUTOSSNRCY *NO
Acknowledgment frequency....ACKFRQ 100
Text ‘description’.......TEXT *BLANK
Bottom